Expert eyebrow and eyelash flexing system ELAN SUPERSONIC MAX Serum 3 (pink tube), 8 ml

How Serum 3 Cera Healer works:

- Provides deep nourishment and hydration to the hairs of the eyebrows and eyelashes thanks to a combination of linolenic acid, panthenol, ceramide NP and olive oil;

– helps to restore the natural pH of the hairs;

- gives hair shine and elasticity;

- fixes the form;

- effectively protects the hairs from the aggressive effects of external factors.

The hydrogen index (pH) of the product is 4.0-5.5.

For professional use only!

Use only with Cera Healer Serum 1 and Serum 3!

Shelf life: 24 months.

Shelf life after opening: 6 months.

Ingredients: AQUA, CETEARYL ALCOHOL, PROPANEDIOL, CETEARETH-33, OLEA EUROPAEA (OLIVE) FRUIT OIL, PANTHENOL, CERAMIDE NG, GUAR HYDROXYPROPYLTRIMONIUM CHLORIDE, LINOLEIC ACID, LINOLENIC ACID, DISODIUM EDTA, TOCOPHEROL, SODIUM HYDROXIDE, ETHYLHEXYLGLYCERIN, BENZYL ALCOHOL, PARFUM.

How to use: After applying Serum 1, apply Serum 2 to the eyebrows or eyelashes. Exposure time: 6-10 minutes depending on the condition of the eyebrow or eyelash hairs (see instructions for use).

Remove any remaining product with a cotton pad soaked in water.

IMPORTANT! Before the procedure, perform an allergic reaction test: apply 2 drops of each product to a small area of the skin of the elbow crease 48 hours before use. If redness, swelling or irritation does not appear on the skin, you can start the flexing procedure.

STAGES OF THE EYEBROW FLEXING PROCEDURE

1) Diagnostics of the condition of the client's eyebrow hairs and determination of the exposure time of the flexing products according to the points indicated below:

Group 1: brow hairs are rough, hard and dense, not previously treated with chemical compounds (coloring, lightening procedures) - exposure time is 5-8 minutes for Serum 1 and at least 6-8 minutes for Serum 2;

2nd group: eyebrow hairs of medium thickness, natural, healthy or previously treated with chemical compounds (coloring, lightening procedures) - exposure time is 3-5 minutes for Serum 1 and 6-8 minutes for Serum 2;

IMPORTANT! The maximum exposure time for Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the faster the reaction rate.

2) Preparation for the brow flexing procedure. Determine the condition and structure of the eyebrow hairs in order to correctly calculate the amount of funds and exposure time.

3) Creation of the shape of the eyebrows (Serum 1). Apply Serum 1 on the eyebrows with a professional make-up brush BLACKWOOD #3 ТМ ÉLAN professional line.

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply TM ÉLAN professional line argan oil cream on the eyebrows (thin layer) and on the skin around the eyebrows (thick layer). We recommend using the BLACKWOOD #4 TM ÉLAN professional line professional makeup brush.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

After the exposure time has elapsed, remove the remnants of the product with a cotton pad moistened with water.

IMPORTANT! At the stage of creating the shape of the eyebrows, the direction of growth of the client's hairs should be taken into account. Changes should be smooth to avoid creases.

4) Fixing the direction of the hairs (Serum 2). Apply Serum 2 on the eyebrows and spread it over the entire surface of the hairs, gently laying them in the desired direction.

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply TM ÉLAN professional line argan oil cream on the eyebrows (thin layer) and on the skin around the eyebrows (thick layer). The BLACKWOOD #4 TM ÉLAN professional line professional makeup brush is suitable for this.

IMPORTANT! The amount of product used at stage IV (Serum 2) should be equal to the amount of product used at stage III of eyebrow shaping (Serum 1).

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of eyebrow shaping (Serum 1), but not less than 6 minutes.

After the exposure time has elapsed, remove the remnants of the product with a cotton pad moistened with water, if after the completion of the flexing procedure it is planned to carry out the eyebrow coloring procedure.

After the exposure time has elapsed, remove the remaining product with a cotton pad moistened with ÉLAN professional line Cleansing Eyebrow and Eyelash Detox Mousse to complete the chemical reaction, if no eyebrow tinting is planned after the flexing procedure. Wash off the foam with a cotton pad moistened with water.

5) Hair care (Serum 3 Cera Healer). Apply Serum 3 Cera Healer on the eyebrows and spread it over the entire surface of the hairs. Exposure time: 5 min.

After the exposure time has elapsed, remove the remnants of the product with a cotton pad moistened with water, if after the completion of the flexing procedure it is not planned to carry out the eyebrow coloring procedure.

After the exposure time has elapsed, remove the remaining product with a cotton pad moistened with ÉLAN professional line Cleansing Eyebrow and Eyelash Detox Mousse to complete the chemical reaction, if after the completion of the flexing procedure, a brow coloring procedure is planned. Wash off the foam with a cotton pad moistened with water.

Apply the color mixture to the brows immediately after applying ÉLAN professional line Cleansing Eyebrow & Eyelash Detox Mousse.

IMPORTANT! It must be borne in mind that in the process of dyeing, the color on the hairs will be brighter and appear faster.

After coloring, apply "ÉLAN professional line COLOR FIX for eyebrows and eyelashes with keratin and sunflower oil" to the eyebrows to fix the result.

IMPORTANT! Eyebrow correction is performed exclusively after the flexing procedure. We recommend to perform correction with tweezers for less damage to the skin.

STAGES OF THE EYELASH FLEXING PROCEDURE

1) Diagnostics of the condition of the client's eyelashes and determination of the exposure time of the flexing agents according to the points indicated below:

1st group: eyelash hairs are thick or even - exposure time is 6-10 minutes for Serum 1 and at least 6 minutes for Serum 2;

2nd group: eyelash hairs of medium thickness or thin - exposure time is 3-6 minutes for Serum 1 and at least 6 minutes for Serum 2;

The exposure time of Cera Healer Serum 3 is 5 minutes for all hair groups.

IMPORTANT! The maximum exposure time for Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the faster the reaction rate.

2) Preparation for the eyelash flexing procedure. Determine the condition and structure of the eyelashes in order to correctly calculate the amount of funds and exposure time.

Use ÉLAN professional line Brow & Eyelash Cleansing Detox Mousse to degrease hairs before lash flexing. Remove foam with a cotton pad moistened with water.

Fix the silicone roller of the required size on the upper eyelid. Distribute and fix the eyelashes on the roller with fixing gel for eyelash lamination ТМ ÉLAN professional line and an applicator.

3) Formation of the curvature of the eyelashes (Serum 1). Apply Serum 1 to the lash curl area. The BLACKWOOD #1 TM ÉLAN professional line professional makeup brush is suitable for this.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

After the exposure time has elapsed, remove the remaining product with a dry brush in the direction of lash growth. The BLACKWOOD #2 TM ÉLAN professional line professional makeup brush is suitable for this.

4) Fixing the direction of the eyelashes (Serum 2). Apply Serum 2 to the entire lash area in a thick layer.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of eyelash curl formation (Serum 1), but not less than 6 minutes.

After the exposure time has elapsed, remove the remaining product with a dry brush in the direction of lash growth. The BLACKWOOD #2 TM ÉLAN professional line professional makeup brush is suitable for this.

5) Eyelash care (Serum 3 Cera Healer). Apply Serum 3 Cera Healer to the entire lash area. Exposure time: 5 minutes.

After the exposure time has elapsed, remove the remnants of the product and the fixing gel with a cotton pad moistened with water.

IMPORTANT! To achieve the most expressive effect and visible result, the technologists of the ÉLAN professional line brand recommend that after the completion of the eyelash flexing procedure, the eyelashes should be tinted with TM ÉLAN professional line gel-paint in the color “01 black”.

To complete the chemical reaction, also after tinting the eyelashes, apply ÉLAN professional line Cleansing Eyebrow and Eyelash Detox Mousse to the eyelashes. Remove foam with a cotton pad moistened with water.

Apply ÉLAN professional line COLOR FIX Brow and Eyelash Fluid with Keratin and Sunflower Oil to your lashes to set the result.

RECOMMENDATIONS AFTER THE EYEBROW AND EYELASH FLEXING PROCEDURE

! We do not recommend henna dyeing or lightening the eyebrows, as the result can be completely unpredictable: the structure of the hairs can be broken, which can lead to their fragility and loss.

! Within 24 hours after the procedure, visits to the bath, sauna and solarium should be excluded, as well as mechanical violation of the shape of eyebrow styling and eyelash bending (sleeping face down in a pillow), minimizing contact with water, and not combing eyebrows and eyelashes.

! Within 48 hours after the procedure, it is necessary to avoid exposure of the eyebrows and eyelashes to aggressive cosmetics and procedures (scrubs, peels, alcohol-containing lotions, laser procedures).